Title 24 Compliance
|
|
Pricing Schedules
The pricing and rate information included in this
page are for most common services provided by MSI on typical projects. The
pricing schedules provided hereunder are intended for budgetary purposes
only. Actual pricing may vary, depending on the project complexity and
customer's specific requirements. We would be glad to provide you with a
firm quotation on hourly rate basis or as a project lump sum, not to exceed,
price basis. Please send us your inquiry by completing the Quote
Request Form provided at the Support
Section.
Energy Analysis - Residential
Energy Analysis - Non-Residential
|
|
|
For limited time a 10% discount on listed prices of all Title-24 reports
is offered for any On-Line service order. Click here
to place an order.
Typical Title 24
Compliance Report using computer modeling and performance simulation for Low
Rise Residential structure or Single Family Dwelling includes the following:
 |
Test
compliance calculations for New Construction,
Additions or Existing Plus Addition. |
|
Performance
calculations using Computer Simulation Method. |
|
ASHRAE design heating and cooling load calculations. |
|
Sizing
heating and cooling equipment. |
|
HVAC
system selection using comprehensive database of certified mechanical
systems. |
|
Mandatory
Measures Check List, reflecting minimum compliance requirements. |
|
High
quality Title 24 forms with exact graphic images of those produced by
State agencies. |
|
High
quality professional looking reports for speedy and trouble-free permit
approval.
|
|
| |
|
Description
|
Price
|
| New
Construction |
Up to 1,800 ft2
of conditioned space area |
$180 |
| More than
1,800
ft2 but less than 3,600 ft2 of conditioned
space area |
$250 |
| 3,600 ft2
or more of conditioned space area with a Single HVAC System |
$300 |
| 3,600 ft2 or
more of conditioned space area with Two HVAC Systems |
$350 |
| 5,000 ft2 or
more of conditioned space area or Custom Homes with Two or Three
HVAC Systems |
Note
1 |
| Alterations |
Changes that
require a building permit but do not add conditioned floor area or
conditioned volume, typically requires "Alteration"
analysis and compliance to the mandatory measures |
$150 |
| Additions |
400 ft2
or more of conditioned space area, with glazing to floor area of less than
20%, and the existing HVAC system does not serve the addition, or a
new HVAC system serves the addition, typically requires "Addition Alone"
analysis |
$250 |
| 400 ft2
or more of conditioned space area, with glazing to floor area of
more than 20%, and a Single existing or new HVAC system serving the
entire structure, typically requires "Existing +
Addition" analysis |
$300 |
| 400 ft2
or more of conditioned space area, with glazing to floor area of
more than 20%, and Two existing, new or combination HVAC Systems serving the
entire structure, typically requires "Existing
+ Addition" analysis |
$350 |
| 400 ft2
or more of conditioned space area, with glazing to floor area of
more than 20%, and Three existing, new or combination HVAC Systems serving the
entire structure, typically requires "Existing
+ Addition" analysis |
Note
1 |
|
|
|
| |
|
Note 1:
|
Consult with MSI for price quotation
|
| |
|
|
|
|
|
Typical Title 24
Compliance Report using computer modeling and performance simulation for
Non-Residential and High-Rise Residential structures includes the following:
|
Prescriptive
compliance calculations to include envelope, lighting and
mechanical. |
|
Performance-based
compliance calculations. |
|
ASHRAE design heating and cooling load calculations. |
|
Sizing
heating and cooling equipment. |
|
HVAC
system selection using comprehensive database of certified mechanical
systems. |
|
Load
calculations based on actual energy use profiles to determine
eligibility for Utility Incentive Programs. |
|
Room
by room lighting calculations. |
|
High
quality Title 24 forms with exact graphic images of those produced by
State agencies. |
|
High
quality professional looking reports for speedy and trouble-free permit
approval.
|
|
| |
|
Description
|
Price
|
| Prescriptive
Envelope (ENV) |
For evaluation
of building Envelope compliance using Prescriptive Package
requirements, as explained in Chapter 3 of the CEC Non-Residential
Manual, considering the building as a Single Thermal Zone |
Under 2,000 ft2
Floor Area |
$180 |
| 2,000 ft2
- 10,000 ft2 Floor Area |
$350 |
| More than
10,000 ft2 Floor Area |
$450 |
| Prescriptive
Mechanical (MECH) |
For evaluation
of building Mechanical System compliance using Prescriptive Package
requirements, as explained in Chapter 4 of the CEC Non-Residential
Manual. This method performs Heating & Cooling Load
Calculations per ASHRAE Standards, and provides HVAC Equipment
Selection. Evaluation up to 10,000 ft2
floor area Note3. |
Up to 3
Thermal Zones |
$300 |
| 4 to 9 Thermal
Zones |
$700 |
| More than 9
Thermal Zones |
$800 |
| Prescriptive
Lighting (LTG) |
For evaluation
of building Lighting compliance using Prescriptive Package
requirements, as explained in Chapter 5 of the CEC Non-Residential
Manual. This simple compliance
method assumes a Constant Lighting Allowance throughout a
building. |
Under 2,000 ft2
Floor Area |
$160 |
| 2,000 ft2
- 10,000 ft2
Floor Area |
$350 |
| More than
10,000 ft2
Floor Area |
$450 |
| Tailored
Lighting (TLTG) |
For evaluation
of building Lighting compliance using Customized Allowances to
specific lighting requirements of the building, for either
Prescriptive or Performance Compliance Methods, using Room-by-room
Analysis approach. |
Under 2,000 ft2
Floor Area |
$250 |
| 2,000 ft2
- 10,000 ft2
Floor Area |
$400 |
| More than
10,000 ft2
Floor Area |
$500 |
| Performance
Simulation (Win/DOE) Note2 |
For evaluation
of building Envelope, Mechanical and Lighting compliance using
Win/DOE Mode requirements, as explained in Chapter 6 of the CEC
Non-Residential Manual. This Complete Energy Analysis
also predicts Annual Building Energy Performance and calculates the
Actual Building Energy Use. Evaluation up to 10,000 ft2
floor area Note3. |
Up to 3
Thermal Zones |
$650 |
| 4 to 9 Thermal
Zones |
$950 |
| More than 9
Thermal Zones |
$1,200 |
Note2:
Note3:
|
This is an Inclusive
Energy Analysis. Please DO NOT check buttons of
other categories when placing an order.
For more
than 10,000 ft2
floor area please contact MSI for price quotation
|
|
|
|
|
|
| |
|
Typical engineering
services provided by MSI for Residential Structures cover the following areas:
|
Heating, Ventilation & Air Conditioning
(HVAC) Design |
|
Plumbing
Design and Mechanical Equipment Sizing & Selection
|
|
Architectural
Design and Drafting Services
|
|
Plan
Check for compliance with UBC Standards & Regulations
|
|
Discipline
|
Rate
|
| Engineering |
$90/hr |
| Drafting ** Note |
$40/hr |
| Clerical |
$30/hr |
|
| **Note:
|
All drawings provided by MSI are generated using
ACAD Rel. 2002. ACAD Rel. 2000 and Rel. 14 are available upon request. |
|
|
|
